Logo

IKAN 9″ DIRECTORS HAND HELD MONITOR

Supporting video signals up to 2K, the Ikan VX9i-1 9″ Full HD Plus 3G-SDI/HDMI Monitor features 1920 x 1200 native resolution, a Gorilla Glass front, and comes with three interchangeable battery plates. It features digital and analog loop-through inputs and outputs, with cross conversion between the HDMI and SDI inputs. With a 450 cd/m² and 900:1 Contrast Ratio, the monitor delivers a sharp, bright image, and the IPS panel provides 170° viewing angle with minimal color or contrast shift, so your crew can crowd around the monitor and still see an image with good color and contrast.

Category: Tags: , , , ,

Description

The Gorilla Glass front offers superior protection to the screen versus most monitors that do not have a protective front. Monochrome peaking helps you confirm focus, while false color and ikan’s clip guides are useful exposure tools. DSLR scaling offers you four scaling options, and the monitor’s underscan function allows you to be sure you are seeing the edges of your frame. The monitor has a zoom function that lets you expand the image displayed on the monitor to approximately twice the size. The front panel sports eight assignable function buttons that let you quickly bring up often accessed menu pages, and the monitor has built-in front and rear Tally indicators. Four 1/4″-20 threaded mounting holes, one on each side, allow you to mount the monitor on a variety of accessory supports, and the included table stand allows you to place the monitor on a flat surface for easy viewing.
HDMI / SDI Cross Conversion
The monitor cross converts HDMI to SDI and SDI to HDMI, which means that if you input an HDMI signal you get simultaneous HDMI and SDI outputs. Inputting an SDI signal also provides you with simultaneous SDI and HDMI outputs. This allows you to feed either an HDMI or SDI workflow after the monitor, no matter if the input is HDMI or SDI.
Loop-Through Outputs
All the inputs provide complimentary loop-through outputs, which means no matter what tools you employ on the monitor, a clean unaffected signal is available on the monitor’s outputs.
Gorilla Glass Front
Gorilla Glass protects the LCD panel from the rigors of production. It is strong and durable, and as an added bonus you can use optional dry erase markers to draw on the screen if you need to communicate something visual with your crew, or need to match a frame.
Peaking
Ikan monitors are equipped with monochrome peaking, which turns the image into a grey scale and then highlights the most contrasty area of the frame in a bright red outline. The operator adjusts the focus control until the red indicator outlines on the desired area are razor sharp, indicating optimal focus. For the best results, be sure the subject is properly exposed.
False Color
The False Color feature provides under/over luminance warning by presenting the image as a series of color values representing exposure.
Clip Guides
The operator simply assigns the upper IRE to their preference and any exposure over the set IRE limit will flash in a vivid purple, indicating only the over exposed area.
DSLR Scaling
The DSLR scaling function provides four choices that enable users to extend their DSLR camera’s HDMI video output: Normal, 3:2, 16:9 or full screen.
Underscan
Shrinks your image to fill the entire screen, this allows you to see the edges of your footage. Traditionally consumer monitors had the image size cranked up to prevent the consumer from seeing black edges around the image. However in a professional workflow it is important to be able to see to the very edge of you image to make sure it is clear from unwanted intrusions, which is what the underscan function allows.
Tally
An RJ-45 connector is used for the Tally function, with front and rear Tally indication.
Table Stand
The included table stand attaches to the monitor and features 3 x 1/4″-20 threaded mounting holes on the base.

ikan VX9I-1 Specs
LCD Size 8.9″
Video System NTSC/PAL/SECAM (auto-detect)
Resolution 1920 x 1200
Brightness 450 cd/m2
Contrast 900:1
Viewing Angles 170 / 170° (H / V)
Response Time 16 ms
Supported Formats & Resolutions 3G-SDI
2048x1080psf: 23.98, 24, 25, 29.97, 30 Hz
1920x1080p: 50, 59.94, 60 Hz (4:2:2 YCBCR)

HD-SDI
1920x1080p: 23.97, 24, 25, 29.94, 30 Hz (4:4:4 YCBCR)
1920x1080psf: 23.98, 24, 25, 29.97, 30 Hz (4:4:4 YCBCR)
1920x1080i: 50, 59.94, 60 Hz (4:4:4 YCBCR)
1280x720p: 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz (4:4:4 YCBCR)

SD-SDI
720x480i: 60Hz (4:2:2)
720x576i: 50Hz (4:2:2)

HDMI
1920x1080p: 23.97, 24, 25, 29.94, 30 Hz
1920x1080psf: 24, 25, 29.97, 30 Hz
1920x1080i: 50, 59.94, 60 Hz
1280x720p: 23.97, 24, 25, 29.94, 30, 50, 59.94, 60 Hz
720x480i: 60 Hz
720x576i: 50 Hz

Component
1920x1080p: 23.97, 24, 25, 29.94, 30 Hz
1920x1080psf: 24, 25, 29.97, 30 Hz
1920x1080i: 50, 59.94, 60 Hz
1280x720p: 23.97, 24, 25, 29.94, 30, 50, 59.94, 60 Hz
720x480i: 60 Hz
720x576i: 50 Hz

composite
NTSC-M, NTSC-J, NTSC 4.43
PAL B/G H I D, PAL M, PAL N
SECAM
Input and Output Connectors Inputs
SD/HD/3G-SDI: 1 x BNC
HDMI: 1 x HDMI Type A
YPbPr Component: 3 x BNC
Composite: 1 x BNC
Audio: 3.5 mm stereo jack

Outputs
SD/HD/3G-SDI: 1 x BNC
HDMI: 1 x HDMI Type A
YPbPr Component: 3 x BNC
Composite: 1 x BNC
Audio: 3.5 mm stereo jack
Tally 1 x RJ-45
Mounting 4x 1/4″-20 threaded holes, one on each side
Power Requirements 7 to 24V DC
Power Consumption 8.5 W
Operating Temperature 32 to 122°F / 0 to 50°C
Dimensions (WxHxD) 9.1 x 7.0 x 1.6″ / 23.2 x 17.8 x 4.1 cm
Weight 3.5 lb / 1.6 kg
Packaging Info
Package Weight 5.9 lb
Box Dimensions (LxWxH) 15.5 x 14.6 x 4.1″

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

J. Cole - MIDDLE CHILD J. Cole - Kevin's Heart J. Cole - ATM (Official Music Video) J-Cole - Apparently ( Lyrics Video)